The new flooring installation is usually an essential upgrade for most homes. It’s typically expensive and requires a lot of time and effort. Therefore it’s necessary to ensure that the job is done correctly from beginning to end. If the project is successful, the flooring could significantly improve a house’s appearance, performance, and worth. The most crucial element in the entire process is the removal of flooring. How do you get rid of the flooring you have previously installed? And, most notably, what is the best way to get rid of it?
The steps involved in removing the flooring get based on the type. To help you understand the procedure, we have listed the most commonly used kinds of flooring as well as the steps to get rid of them:
Carpet
The process of removing carpeted floors begins with removing any obstacles like baseboards. After that, you must divide the carpeting into manageable pieces. From there, you can remove the carpeting starting at one end and then roll it up while you go. There will be Tack strips that are easy to remove with the pry bar. Be careful when removing them, particularly when you have concrete flooring. If this is the case, you might require more strength when hammering with the bar. Wear safety glasses to protect yourself.
That’s it. Once you’ve removed all carpeting, ensure the floor is spotless before installing flooring.
The job isn’t over, however. The old carpet needs to get thrown away. Putting construction debris in the bins curbside is not legal. You must ensure that you have a plan for disposing of rugs, as you cannot dispose of flooring materials alongside your regular waste.
Laminate and Vinyl
It is possible to begin the removal process by removing down baseboards and doors blocking the way. Start the removal by locating a corner or an edge and lift a plank using the hammer and pry bar. Keep in mind that you can reuse the planks. Therefore it is essential to be cautious when raising and taking them away.
A different option is to employ a circular saw to make the planks. Select the correct blade depth that gets based on the amount of thickness the planks have. Follow the directions provided by the manufacturer, and make sure to follow the instructions that get provided. Make sure to roll up the underlayment, which you can reuse or throw away once it’s in good shape. It is necessary to complete the job by taking off the remaining adhesive. Be sure to take the proper precautions to ensure you don’t damage the subfloor.
Again, take the time to clean your floor before proceeding to the next stage, installing your flooring.
Linoleum
Before proceeding to do any work, check for asbestos first, mainly if the building or flooring get used from the 1970s to the 1980s. However, if your flooring is relatively new, you don’t have to be concerned about asbestos. In this case, you may prefer to delegate the task to experts. You could also employ an expert asbestos removal company.
Begin by removing the linoleum flooring from the subfloor. Begin the process with one corner, then work toward the opposite side. You can make use of a floor scraper for faster removal. Also, you will require vital adhesive removal to remove the glue on the subfloor.
Tile
To install this flooring material, you must first prepare the area by ensuring no obstructions, such as plumbing facilities like sinks or toilets. It would be best to employ a hammer, an axe, or a chisel to remove the tile. If the tile is a good fit, the next step is the removal of the underlayment. Some tiles might be in good shape, So you may wish to save them from making them usable. Also, take out any stray nails or staples if they are present. Make sure to clean the space and dispose of tiles correctly.
Flooring Tips for Disposal
No matter what flooring materials you use, you must consider the disposal process. You’ll produce a lot of waste, so think about this before proceeding. It would be better if you had a strategy to eliminate the old flooring. You can also reuse old flooring.
Remember that you can’t donate old flooring material, such as carpets. Most charities don’t take in old carpets or used ones to avoid health issues. But here are some alternatives:
- Retailers might be willing to remove the carpet, particularly carpets, for you.
- Fitters might offer to take care of old flooring, but usually, you have to engage them to do the removal. However, some offer to do this for a charge.
- You can use the flooring you’ve previously installed based on its condition.
The most efficient method to dispose of new carpet, tile, or laminate flooring, and various kinds of flooring, is to rent the services of a skip bin. What size bin you choose to hire is essential as it will be sufficient to hold the waste you generate during the project.
The amount you can save and the size you use of the carpet will depend on how you get rid of the rug. Make sure you can fit the carpet into the bin in the smallest space possible.
Let Ottawa Dumpster know if you require additional assistance with your remodeling or flooring removal so we can advise you on the appropriate size bin to utilize. Contact us at (613) 317-1661 or mail us at info@OttawaDumpster.ca.